Starting Spm; Figure 2-5. Remote Modem Connection - AT&T MERLIN LEGEND Release 2.0 System Programming Manual

Programming with SPM

Figure 2-5. Remote Modem Connection

NOTE:
Any modem connection overrides a direct connection unless a backup or
restore procedure is in progress via a direct local connection. When a
modem connection is attempted while any other on-site programming is in
progress, either at the system console or at a directly connected PC, the
system sends a message to the on-site programmer indicating that a
modem connection is being established, and the on-site programming .
session is terminated.

Starting SPM

The procedure for accessing SPM differs slightly, depending on whether your
PC is connected directly or by modem to the control unit. Both procedures are
described in the following sections.
2-10 Starting SPM