AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 219

Programming Procedures
Display/Instructions
Step
Save your entry.
If you get the Trunk Busy message,
wait for an idle condition, or exit
system programming and try
again later.
xxxx = trunk entered in Step 4
Specify the direction.
To save your selection and
specify direction for another tie
trunk:
If next tie trunk number
is sequential
Your previous entry is saved
and next tie trunk number is
shown on line 1 of the screen
shown in Step 6.
If next tie trunk number
is not sequential
To save your entry when all
entries are complete
To return to System
Programming menu
3-128 Direction
On the console
Select Enter.
Select Two Way,
OutGoing, or
InComing.
Select Next.
Repeat Step 6.
Select Enter.
Repeat Steps 3-6,
Select Enter.
Select Exit two times.
On the PC
[F10]
Press
[F1], [F2],
Press or
[ F 3 ]
[F9]
Press
Repeat Step 6.
Press [F10]
Repeat Steps 3-6.
[F10]
Press
[F5]
Press two times.