AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 297

Programming Procedures
Display/Instructions
Step
Erase current setting.
Specify new setting using
Table 3-2.
To save your entry and assign
setting to another slot:
If next slot number is
sequential
Your entry is saved and next
slot number appears on line 1
of the screen in Step 9.
If next slot number is not
sequential
To save your entry when all
entries are complete
To return to System
Programming menu
3-206 Timers and Counters
On the console
Press Drop.
Dial [nnnn].
Select Next.
Repeat Steps 9 and 10.
Select Enter
Repeat Steps 5-9.
Select Enter.
Select Exit four times.
On the PC
[Alt] [P]
Press +
Type [nnnn].
[F9]
Press
Repeat Steps 9 and 10.
[F10]
Press
Repeat Steps 5-9.
[F10]
Press
[F5]
Press four times.