AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 197

Programming Procedures
Frame Format
Use this procedure to specify the framing format for the 100D module as D4
Compatible or Extended Super Frame. Your selection must match the framing
mode at the far end of the DS1 facility.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Frame Format
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Frame Format
3-106
Sys Program Exit
[F1]
press any key
System manager
All
100D module idle
Form 3b, Incoming Trunks - DS1 Connectivity (100D
Module)
D4 compatible
D4, ESF
No
No
LinesTrunks LS/GS/DS1
FrameFormat Select format type
Exit E x i t
[F4] [F1]
Type slot no.
[F10]
format type
[F5]
Dial Slot no.
Enter
[F10] [F2]
[F5] [F5]
Enter
Select