AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 149

Programming Procedures
Procedure: Outmode Signaling for Loop or Ground Start Trunks
Display/Instructions
Step
Select the Lines and Trunks
Select Touch-Tone/Loop Start
Disconnect
Select Outward Dialing Mode.
To select single line, go to Step
5 a .
To select block of Iines, go to
Step 5b.
3-58 Outmode Signaling for Loop or Ground Start Trunks
On the console
Select LinesTrunks.
Select LinesTrunks
Select Outmode
On the PC
[F4]
Press
[F3]
Press
[F1]
Press