AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 43

Programming Overview
Display/Instructions
Step
3
Display System Programming
menu. (Your system set-up
information displays in place of
the x's shown in screen.)
Note: The System Set-up
screen is an information screen.
The information shows the
system size (small or large),
type (mode), and Operator
(position extension numbers).
The size and type are
programmed during installation.
The operator positions that
display will change as you add
and remove operator
extensions from the system.
4
Make a selection.
Note: A > on the screen means
that the menu has more than
one screen. To see the
additional screens, press More.
Entering System Programming
1-16
On the console
P r e s s
Select Exit.
Press the button next to
your selection.
On the PC
[ F5 ]
Press the function key
for your selection.