AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 439

Programming Procedures
Display/Instructions
Step
**** = option name selected in Step 4
If a DSS is attached, go to Step
10a.
If a DSS is not attached, go to
Step 10b.
If a DSS is attached, do the
following:
Check red LEDs for feature
status.
The red LED indicates the following:
flashing = operator does not
receive call type
on= operator receives call
type
off = extension is not an
operator position
If DSS is not attached, specify
the extension in one of the
following ways:
Extension number
Slot and port number
Logical ID number
If you selected the Returning
option in Step 4, dial 0.
Specify whether operator
receives call type.
To return to the System
Programming menu
3-348 QCC Operator to Receive Call Types
On the console
Toggle the LED On/Off,
as required.
Dial [nnnn]
Dial [sspp]
Dial # [nnn]
Select Enter or
Delete.
Select Exit five times.
On the PC
Type [nnnn]
Type [sspp]
Type # [nnn]
[F10] [F8]
Press or
[F5]
Press five times.