AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 352

Programming Procedures
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Hybrid/PBX Mode: System Access Ring, System
Access Voice, and System Access Originate Only
(Ring) buttons are assigned to all analog multiline and
MLX telephones, excluding operator positions. Two
System Access Ring buttons and a System Access
Originate Only button are assigned to tip/ring
equipment (for example, single-line telephones or fax
machines connected to an 012 module). No Personal
line or Pool buttons are assigned.
All modes: System Access Ring (Hybrid/PBX mode) or
Intercom Ring (Key and Behind Switch modes), System
Access Voice (Hybrid/PBX mode) or Intercom Voice
(Key and Behind Switch modes), and the first 18
through 29 lines connected to the control unit are
assigned to all DLC operator positions. The number of
lines assigned depends on the type of telephone used
as a DLC operator position. Refer to the appropriate
telephone planning form for details.
Not applicable
Yes: specific button options
Yes (You can copy additional SA buttons to another
station, but you cannot overwrite SA buttons that are
already assigned.)
To Program Extension:
More Cntr-prg program Ext.
Enter Start Program extension
Exit E x i t
To Copy Extension Programming: -
More Cntr-prg copy ext.
ext. 170. Enter Dial copy to ext. no.
Exit E x i t
To Program Extension:
[PgUp] [F4] [F1]
[F10]
Program extension
To Copy Extension Programming:
[PgUp] [F4] [F2]
[F10]
Type copy to ext. no,
Assign Intercom or System Access Buttons
Dial ext. no.
Enter
Dial copy from
Enter
[F10]
Type ext. no.
[F10] [F5] [F5]
Type copy from ext. no.
[F10] [F5] [F5]
3-261