AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 336

Programming Procedures
T e l e p h o n e s
The procedures in this section detail the steps for the following:
assigning outside lines or trunks to the buttons on a telephone (including
line and trunks used for loudspeaker paging)
copying line button assignments from one telephone to an individual
telephone or block of telephones
For Hybrid/PBX systems only:
assigning the following buttons on telephones
— System Access or Intercom Voice
— System Access or Intercom Ring
—
— Shared System or Intercom Access
identifying analog multiline telephones that do not have built-in
speakerphones or Hands Free Answer on Intercom capability
identifying analog multiline telephones that require pairing of station
jacks to provide the Voice Announce to Busy or to provide Simultaneous
Voice and Data features
System Access or Intercom Originate Only
Telephones
3-245