Programming Procedures
Procedure: Remote Access Trunk Assignment
Display/Instructions
Step
Select the lines and Trunks
menu.
Select Remote Access.
Select Lines and Trunks.
Specify the line/trunk in one
of the following ways (if you are
programming a sequence,
enter the lowest number):
trunk number
Logical lD number
Save your entry.
On the console
Select LinesTrunks.
Select RemoteAccss.
Select LinesTrunks.
Dial [nnnn]
Dial #[nnn]
Select Enter.
Remote Access Trunk Assignment
On the PC
[F4]
Press
[F8]
Press
[F1]
Press
Type [nnnn]
Type #[nnn]
[F10]
Press
3-475