AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 66

Programming with SPM
Step
Boards
The Boards option allows qualified service personnel to add a board to the next
available slot. The system must be idle to use this option. This option is not
available from the system programming console.
2-16 Using SPM
Instructions
DispIay
Enter the filename you have chosen, or
press
You can specify a drive letter with the
filename (
information.
SPM indicates the status of the backup by
displaying the number of the last block
received, If you are backing up from
Release 1.1 or 2.0 of the communications
system, Line 2 of the display screen shows
the estimated number of blocks to be sent
from the control unit. This line is blank if
you are backing up from Release 1.0.
If you abort the backup, the partial backup
file is deleted to prevent restoration from a
corrupted file. You see the screen shown
in Step 6. Otherwise, when Backup is
complete, you see the screen shown in
Step 7.
Press
M e n u .
Press
M e n u .
[ ]
to select the default name.
: or : ) but no path
A B
[ ]
to return to the SPM Main
[ ]
to return to the SPM Main