AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 137

Programming Procedures
Procedure: QCC Operator Positions
Display/Instructions
Step
Select the Operator menu.
Select Positions.
Select the QCC position.
If you get the System Busy message,
wait for an idle condition, or exit
system programming and try agan
later.
lf you have a DSS attached, go
to Step 5a.
If you do not have a DSS
attached, go to Step 5b.
3-46 QCC System Operator Positions
On the console
Select Operator.
Select Positions.
Select Queued Call.
On the PC
[ F3 ]
Press
[ F1 ]
Press
[ F2 ]
Press