AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 500

Programming Procedures
Display/Instructions
Step
Specify the extension of the
calling group (if you are
programming a sequence,
enter the lowest number).
Save your entry.
xxxx = number entered in Step 5
nnnn = current extension
Erase current external alert.
Specify the external alert you
want to assign in one of the
following ways:
Extension number
Slot and port number
Logical ID number
DSS
If DSS is attached, check
status of the feature.
The red LED indicates the following:
on = telephone is included in group
off = telephone is not included
group
On the console
Dial [nn]
Select Enter.
Press Drop.
Dial [nnnn]
Dial
Dial # [nnn]
Press DSS button.
Toggle the LED On/Off
as required
Group Calling External Alert for Calls-In-Queue Alarms 3-409
On the PC
Type [nn]
[F10]
Press
[Alt]
Press
Type [nnnn]
[sspp] Type
Type # [nnn]
[P]
+
[sspp]