AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 541

Programming Procedures
Redirect Outside Calls to Unassigned Extension
N u m b e r s
Use this procedure to specify the extension number to receive redirected calls
made to unassigned numbers by Remote Access users, by users on DID trunks
(Hybrid/PBX only), or by users on dial-in tie trunks. Calls can be redirected to
the following:
the QCC queue (Hybrid/PBX only)
another extension number
a calling group
In Hybrid/PBX mode only This setting does not affect calls received on DID
trunks if you have specified that calls to unassigned DID extensions are to
receive a fast busy signal. See "Invalid Destination."
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
3-450 Redirect Outside Calls to Unassigned Extension Numbers
Sys Program
Exit
[F1]
press any key
[F5]