AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 544

Programming Procedures
Display/Instructions
Step
Save your entry.
If you select Extension, go to
Step 6a.
If you select Grp Calling, go to
Step 6b.
If you select QCC Queues, you
have finished this procedure.
To redirect calls to an
extension, do the following:
Specify the extension to which
calls are to be redirected
in one of the following
ways:
Extension number
Slot and port number
Logical ID number
DSS
If you have a DSS, check the
red LEDs for feature status.
The red LED indicates the following:
on= calls are redirected to
specified extension
off = calls are not redirected to
specified extension
Redirect Outside Calls to Unassigned Extension Numbers
On the console
Select Enter.
Dial [nnnn]
Dial [sspp]
Dial #[nnn]
Press DSS button.
Toggle the LED On/Off,
as required.
On the PC
[F10]
Press
Type [nnnn]
Type [sspp]
Type #[nnn]
3-453