AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 145

Programming Procedures
Display/Instructions
Step
**** = 400, 408, 408-MLX, or 800 module
xx = slot number entered in step 3
Specify type of trunks
connected to module.
lf you select All Ground or All
Loop, you have completed this
procedure. Go to Step8.
If you select Ground Start or
Loop Start, go to Step 6.
**** = option name selected in Step 5
xx = slot number entered in Step 3
Specify port numbers on 400
or 408 ports (n = 1 – 4) or 800
ports (n = 1 -8) that have
Ground Start or Loop Start
trunks connected.
If you get the Trunk Busy message,
for an idle confdition, or exit
wait
system programming and try again
later
Type of Trunk
3-54
On the console
Select GroundStart,
L o o p S t a r t , A l l
Ground, or All Loop.
Dial [n],
On the PC
[F1], [F2],
Press
[F3] [F4]
or
Type [n]