AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 347

Programming Procedures
Display/Instructions
Step
For a single telephone, do the
following:
xxxx = extension number entered in Step 4
1. Specify the telephone to
copy assignments to in
one of the following ways
(if you are programming
a sequence, enter the
lowest number):
Extension number
Slot and port number
Logical ID number
DSS
If DSS is attached, check
status of the features.
The red LED indicates the
following:
on= extension is copied to
specified extension
off = extension is not
copied to specified
extension
2. To save your entry and
copy line assignments
from another extension
to an individual
telephone
3-256 Copy Line/Trunk Assignments
On the console
Dial [nnnn].
Dial [sspp].
Dial # [nnn].
Press DSS button.
Toggle the LED On/Off,
as required.
Select Enter.
Repeat Steps 3-6a.
On the PC
Type [nnnn].
Type [sspp].
Type # [nnn].
[F10]
Press
Repeat Steps 3-6a,