AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 478

Programming Procedures
Step Display/Instructions
Specify the extension of the
calling group (if you are
programming a sequence,
enter the lowest number).
Save your entry.
xxxx = number entered in Step 5
Specify the hunt pattern.
To save your selection and
program hunt type for another
calling group:
If next group extension
number is sequential
Your previous entry is saved
and next group extension
number is shown on line 1 of
screen show in Step 7.
If next group extension
number is not sequential
To save your selection when all
entries are complete
To return to System
Programming menu
On the console
Dial [nnnn]
Select Enter.
Select Circular or
Linear.
Select Next.
Repeat Step 7.
Select Enter.
Repeat Steps 5-7.
Select Enter.
Select Exit three
times.
On the PC
Type [nnnn]
[F10]
Press
[F1] [F2]
Press or
[F9]
Press
Repeat Step 7.
[F10]
Press
Repeat Steps 5-7.
[F10]
Press
[F5]
Press three times.
Hunt Type 3-387