AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 117

Programming Procedures
CAUTION:
Select Exit on the console,
selecting the numbering plan. If you press Home, extensions may
remain in the forced idle condition (indicated when the LED next to
each DSS button is on). To restore extensions to their normal
operating state, restart the system.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[ F5 ]
press on the PC before saving your entry or menu selection.
Summary: Select System Numbering Plan
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-26 Select System Numbering Plan
[ F5 ]
on the PC, when you have finished
Sys Program Exit
F1
press any key [ ]
System manager
All
System idle
Form 2a, System Numbering – Station Jacks
2-digit
2-digit, 3-digit, Set Up Space
No
No
SysRenumber Default Numbering
numbering plan
Exit
[ F2 ] [ F1 ]
Select numbering plan
F5
[ ]
Select
Exit
[ F5 ] [ F5 ]