AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 65

Programming with SPM
Step
Instructions
Display
Select Backup by pressing
following two screens appear.
The first screen (Make a selection
for) is an information screen. Entries you
make appear only on the second screen.
If you are using a hard disk PC, go to
Step 3.
If you are using a floppy disk PC, remove
the SPM diskette and insert a formatted
diskette. Highlight GOTO FLOPPY (use the
arrow keys) and press
You see only one of the two narrow
screens. If you are working on a floppy
disk PC, you see the GOTO HARD DISK
screen. If you are working on a hard disk
PC, you see the GOTO FLOPPY screen.
The filename shown on the GOTO screen
(backup.ams) is the default name for a
backup file.
To select the default filename, highlight
BACKUP.AMS (use the arrow keys) and
press
To specify a different name for this file,
select MAKE NEW FILE and press
Go to Step 4.
[ F2 ].
[ ].
[ ].
Go to Step 5.
Using SPM
The
[ ].
2-15