AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 372

Programming Procedures
Loudspeaker Paging
Use this procedure to identify the trunk jack reserved for connection of
loudspeaker paging equipment.
NOTE:
If you use equipment that rebroadcasts music or other copyrighted
materials, you may be required to obtain a copyright license from and pay
license fees to a third party (such as the American Society of Composers,
Artists, and Producers or Broadcast Music Incorporated).
Magic on Hold requires no such license and can be purchased from your
authorized dealer.
A maximum of three single-zone or multizone loudspeaker paging systems can
be connected to the system.
You cannot assign the trunk identified for use for loudspeaker paging
equipment to a trunk pool. If the trunk is currently assigned to a pool, you must
remove it before you program this option.
You cannot assign the trunk identified for use for loudspeaker paging
equipment as a Remote Access trunk, and you cannot use its jack for Music-
on-Hold or maintenance alarm.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Sys Program
Exit
[F1]
press any key
[F5]
Loudspeaker Paging
3-281