AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 111

Programming Procedures
System Time
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports.
NOTE:
If you are planning to use the SMDR feature, make sure the system time is
set accurately.
If you change the system time while the system is in Night Service mode, Night
Service is deactivated and must be manually reactivated.
If you have installed applications such as Call Management System (CMS) or
AUDIX™ Voice Power, you may need to set the time in the applications software
whenever you reset the system time.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[ F5 ]
press
Summary: Set System Time
Programmable by
Mode
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-20 System Time
Sys Program
press any key
on the PC before saving your entry or menu selection.
System manager
All
Form 1, System Planning
0000
0000-2359
No
No
System Time
Exit
[ F1 ] [ F8 ]
[ F10 ]
Exit
[ F1 ] [ F5 ]
Drop Dial current time
[ Alt ] [ P ]
+
[ F5 ]
Enter
Type current time