AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 207

Programming Procedures
Procedure: Line Compensation
Display/Instructions
S t e p
Select the Lines and Trunks
menu.
Select Loop Start/Ground
Start/DS1.
Specify the slot number in the
control unit that contains the
100D module.
Save your entry.
xx = slot number entered in step 3
Select Line Compensation.
Line Compensation
3-116
On the console
Select LinesTrunks.
Select LS/GS/DS1.
Dial [nn]
Select Enter.
Select Line Comp.
On the PC
[F4]
Press
[F1]
Press
Type [nn].
[F10]
Press
[F6]
Press