AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 463

Programming Procedures
Display/Instructions
Step
Select Group Coverage.
Specify the coverage group
(if you preprogramming a
sequence, enter the lowest
number).
Save your entry.
xx = number entered in Step 4
Specify the telephone you want
to program in one of the
following ways:
Extension number
Slot and port number
Logical lD number
DSS
If DSS is attached, check
status of the feature.
The red LED indicates the following:
on= telephone is sender in
coverage group
off = telephone is not sender in
coverage group.
3-372 Group Coverage Member Assignments
On the console
Select Group Cover.
Dial [nn]
Select Enter.
Dial [nnnn]
Dial [sspp]
Dial # [nnn]
Press DSS button.
Toggle the LED On/Off,
as required
On the PC
[F3]
Press
Type [nn]
[F10]
Press
Type [nnnn]
Type [sspp]
Type # [nnn]