AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 69

Programming with SPM
Step
4
To assign another module, select another module type and repeat
5
Steps 3 and 4.
To view types of modules assigned to all slots, press
When all entries are complete, press
terminating the programming session.
Browse
The Browse option is accessed by pressing
browse through reports saved (by using Print Opts) in the reports directory of
the PC's hard disk. When you access Browse, you see a listing of the contents
of the reports directory. To select a report, highlight the desired filename by
using the arrow keys, then press
[ PgDn ].
Togo back a page, press
report, press
Convert
The Convert option simplifies upgrading from an earlier release to Release 2.0
of the communications system. Convert is one of the steps in the upgrade
procedure. The Convert option is available only on Version 2.
(Version 2.00 or higher). Such versions can be easily identified by the
upper left-hand corner of the screen. Conversion is done by qualified service
personnel. The Convert option can be invoked remotely. (See "System
Programming and Maintenance (SPM))." Before you use this option, you must
do the following:
If your PC has a hard disk, install Version 2.
Backup system programming using Version 2.
"Backup" earlier in this chapter. )
Make sure you know the name of the backup file that you have created.
Help screens are available to guide you through the Convert procedure.
Display
[
[ Home ].
To exit from the browse option, press
Instructions
To remove the module type from the
specified slot number, press
(Delete).
To assign the module type to the specified
slot number and assign that same module
type to another slot, press
To assign the module type to the specified
slot number and assign a different module
type to another slot, press
[ F5 ]
(Exit). The system restarts,
[ Ctrl ] + [ F8 ].
].
To view the next page of a report, press
[ PgUp ].
To return to the beginning of a
of the SPM software.
XX
of SPM. (See
XX
[ F8 ]
[ F9 ]
(Next).
[ F10 ]
(Enter).
[ PgDn ].
It allows you to
[ End ].
of SPM
XX
2 in the
V
2-19
Using SPM