AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 204

Programming Procedures
Procedure: Signaling Mode
Display/Instructions
Step
Select the Lines and Trunks
m e n u .
Select Loop Start/Ground
Start/DS1.
Specify the slot number in the
control unit that contains the
100D module.
Save your entry.
xx = slot number entered in Step 3
Select Signaling.
On the console
Select LinesTrunks.
Select LS/GS/DS1.
Dial [nn].
Select E n t e r
Select Signaling.
On the PC
[F4]
Press
[F1]
Press
Type [nn].
Press [ F 1 0 ]
[F4]
Press
3-113
Signaling Mode