AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 613

Programming Procedures
Step Display/Instructions
5. To enter additional route
numbers for
Subpattern A:
If next route number Select Next.
is sequential
Your previous entry is
saved and the next route
number is shown on line
1 .
If next route number Select Enter.
is not sequential
6. To save your entry when Select Enter.
all entries are complete
For Subpattern B, do the
following:
1. Specify table number
(nn = 1-18) and route
number (m = 1 -6) (if you
are programming a
sequence, enter the
lowest number).
2. Save your entry.
3-522 Digit Absorption
On the console
Repeat numbers 3
and 4 in Step 4a.
Repeat Steps 3-4a.
Dial [nnm]
Select Enter.
On the PC
[F9]
Press
Repeat numbers 3
and 4 in Step 4a.
[F10]
Press
Repeat Steps 3-4a.
[F10]
Press
Type [nnm]
[F10]
Press