AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 594

Programming Procedures
Display/Instructions
Step
xx = number entered in Step 4
Specify table type.
Save your entry.
Specify table entry number
(if you are programming a
sequence, enter the lowest
table number).
Save your entry.
xx = number entered in Step 4
xxx = number entered in Step 8
nnn = current area code or exchange
Delete current table entry.
Specify area code or exchange
included on table.
On the console
Select 6-Digit,
Area Code,
Exchange, or 1+7.
Select Enter.
Dial [nnn]
Select Enter.
Press Drop.
Dial [nnn]
On the PC
[F1], [F2],
Press
[F3], [F4]
or
[F10]
Press
Type [nnn]
[F10]
Press
[Alt] [P]
Press +
Type [nnn]
ARS Tables 3-503