Auxiliary Equipment - AT&T MERLIN LEGEND Release 2.0 System Programming Manual

Programming Procedures

Auxiliary Equipment

The procedures in this section describe the steps needed to do the following:
identify the trunk jacks used for Music-on-Hold, loudspeaker paging, and
maintenance alarms
identify the station jacks used for fax, MERLIN MAIL, Voice Messaging
System, Automated Attendant, and AUDIX Voice Power
M u s i c - o n - H o l d
Use this procedure to identify the trunk jack reserved for connection of a music
source, such as a radio, tape player, or stereo system.
NOTE:
If you use equipment that rebroadcasts music or other copyrighted
materials, you may be required to obtain a copyright license from and pay
license fees to a third party (such as the American Society of Composers
[ASCAP], Artists, and Producers or Broadcast Music Incorporated [BMI]).
Magic on Hold® requires no such license and can be purchased from your
authorized dealer.
Only one Music-on-Hold jack is allowed per system.
You cannot assign the trunk identified for Music-on-Hold to a trunk pool. If the
trunk is currently assigned to a pool, you must remove it before you program
this option.
You cannot assign the trunk identified for use with Music-on-Hold to a button on
any telephone or as a Remote Access trunk, and you cannot use the jack
identified for Music-on-Hold for a loudspeaker paging system or maintenance
alarm.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection,
3-278 Music-on-Hold
Sys Program
Exit
[F1]
press any key
[F5]