AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 225

Programming Procedures
Procedure: E&M Signal
Display/Instructions
Step
Selectthe Lines and Trunks
menu.
Select Tie Lines.
Select E&M Signal.
Specify the tie trunk in one of
the following ways (if you are
programming a sequence,
enter the lowest number):
Trunk number
Slot and port number
Logical lD number
E&M Signal
3-134
On the console
Select LinesTrunks.
Select TIE Lines.
Select E&M Signal.
Dial [nnn].
Dial [sspp].
Dial #[nnn].
On the PC
[F4]
Press
[F2]
Press
[ F 4 ]
Press
Type [nnn].
Type [sspp].
Type #[nnn].