AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 562

Programming Procedures
Display/Instructions
Step
x = Iist number entered in Step 3
Specify extension to assign to
Disallowed List in one of the
following ways:
Extension number
Slot and port number
Logical ID number
DSS
If you have a DSS, check the
red LED for feature status.
The red LED indicates the following:
on = disallowed list is assigned
off = disallowed list is not assigned
To remove Disallowed List
from telephone
To assign Disallowed List to
telephone and assign another
Disallowed List to other
telephones:
If next list number is
sequential
Your previous entry is saved
and next extension number is
shown on line 1 in screen in
Step 5.
If next list number is not
sequential
To assign Disallowed List to
telephone when all entries are
complete
To return to System
Programming menu
On the console
Dial [nnnn]
Dial [sspp]
Dial #[nnn]
Press DSS button.
Toggle the LED
On/Off, as required.
Select Delete
Select Next.
Repeat Step 5.
Select Enter and then
select Exit.
Repeat Steps 2-5.
Select Enter.
Select Exit
two times.
Assign Disallowed Lists to Telephones
On the PC
Type [nnnn]
Type [sspp]
Type #[nnn]
[F8]
Press
[F9]
Press
Repeat Step 5.
[F10]
Press and then
[F5]
press
Repeat Steps 2-5.
[F10]
Press
[F5]
Press
two times.
3-471