AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 281

Programming Procedures
Display/Instructions
Step
Specify the B-channel group
(if you are programming a
sequence, enter the lowest
number).
Save your entry.
xx = number entered in Step
Specify whether or not the
telephone number assigned to
the channel is copied as the
number to send to the network.
To save your selection and
assign another group:
If next group number is
sequential
Your previous entry is saved,
and next group number
appears on line 1 of the screen
in Step 7.
If next group number is
not sequential
To save your entry when all
entries are complete
To return to System
Programming menu
3-190 Copy Telephone Number to Send
On the console
Dial [ n n ]
Select Enter.
5
Select Copy PhnNum
to NumToSend or Do
not Copy Phone
Number.
Select Next.
Repeat Step 7.
Select Enter.
Repeat Steps 4-7.
Select Enter.
Select Exit
three times.
On the PC
Type [nn].
[ F 1 0 ]
Press
[F1] [F2]
Press or
[F9]
Press
Repeat Step 7.
[ F 1 0 ]
P r e s s
Repeat Steps 4-7
[ F 1 0 ]
P r e s s
[F5]
Press three times.