AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 505

Programming Procedures
Display/Instructions
Step
Select Group Type.
Specify the extension of the
group.
Save your entry.
xxxx = number entered in Step 6
Specify type of login after
power failure.
To save your selection and
assign Group Type to another
calling group:
If next group extension
number is sequential
Your previous entry is saved
and next group extension
number is shown on line 1 of
screen in Step 8.
If next group extension
number is not sequential
To save your entry when all
entries are complete
3-414 Group Type
On the console
Select Group Type.
Dial [nnnn]
Select Enter.
Press the button next to
your selection.
Select Next.
Repeat Step 8.
Select Enter.
Repeat Steps 5-8.
Select Enter.
On the PC
[F1]
Press
Type [nnnn]
[F10]
Press
Press the function key
next to your selection.
[F9]
Press
Repeat Step 8.
[F10]
Press
Repeat Steps 5-8.
[F10]
Press