AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 626

Programming Procedures
Voice and/or Data Routing
Use this procedure for routing for voice, data, or voice and data. The
voice/data specification is mainly used in conjunction with PRI. See "PRI
Facilities." Voice/data routes can be associated with Subpattern A or
Subpattern B.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Voice and/or Data Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Sys Program
Exit
[F1]
press any key
System manager
Hybrid/PBX
Not required
Form 9c, Automatic Route Selection Default and Special
Numbers Tables
Voice
Voice Only, Data Only, Voice/Data
No
No
Tables ARS More
Dial table no. and route no.
capability Enter
[F8] [F6] [PgUp]
[F10]
and route no.
[F5] [F5]
Voice and/or Data Routing
[F5]
Sub A Data/Sub B Data
Enter Select
Exit Exit
[F7]/[F8]
Type table no.
Select capability
[F10]
3-535