AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 546

Programming Procedures
Host System Dial Codes for Behind Switch Mode
Use this procedure to assign the host system dial codes for Transfer,
Conference, and Drop.
NOTE:
This procedure applies in Behind Switch mode only.
When multiline telephone users press the Transfer, Conference, and Drop
buttons, a signal is sent to the host system. Assigning the host dial codes
ensures that users can take advantage of these features through the host
system.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Host System Dial Codes for Behind Switch Mode
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Sys Program
Exit
[F1]
press any key
System manager
Behind Switch
Not required
Form 1, System Planning
No host dial codes are assigned
Not applicable
No
No
Options More BehndSwitch
Drop Dial host system dial code
Exit E x i t
[F7] [PgUp] [F2]
Type host system dial code
Host System Dial Codes for Behind Switch Mode
[F5]
Select feature
Enter
[Alt]
Select feature +
[F10] [F5]
[P]
[F5]
3-455