AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 451

Programming Procedures
Position Busy Backup
Use this procedure to designate the calling group to provide the backup
position for the QCC queue, that is, to receive incoming calls when all QCC
operator positions are in a Position Busy mode.
Position Busy backup is programmed for the QCC queue rather than for
individual QCC operator positions. The calling group designated as the QCC
queue backup serves as the backup for the Remote Access feature and as
backup when the QCC is being used as the system programming console.
Only one Position Busy backup can be programmed per system.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary Position Busy Backup
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-360 Position Busy Backup
Sys Program
Exit
[F1]
press any key
System manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
No backup
Calling group number
No
No
Operator Queued Call
Drop Dial ext. number
[F3] [F2] [PgUp]
[F10] [F5]
ext. no.
[F5]
More QCC Backup
Enter Exit
[Alt] [P]
+
[F5]
Exit
T y p e