AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 399

Programming Procedures
Copy Call Restrictions
Use this procedure to copy calling restrictions, Allowed Lists, and Disallowed
Lists. Feature assignment must be completed for the "copy from" telephone
and can be copied to an individual telephone or block of telephones with
identical calling restriction requirements.
If you are copying restrictions to a block of telephones and one of the
extensions in the block is in use, you will see the Station Busy - Pls Wait
message on your screen. The copy for the rest of the extensions in the block is
delayed until the extension becomes idle. The specific busy extension is not
shown; however, if a DSS is attached, the LED associated with the busy
extension is on. If you exit without waiting for the extension to become idle,
copying for the rest of the extensions in the block is canceled, but the copying
that has been completed is recorded.
If you are copying restrictions to a block of extensions, they must be
sequentially numbered.
The telephones you are copying to and from can be both operator and non-
operator positions.
NOTE:
Dial-out code restrictions are not copied.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press
3-308 Copy Call Restrictions
Sys Program
press any key
on the PC before saving your entry or menu selection.
Exit
[F1] [F5]