AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 383

Programming Procedures
Voice Messaging System and Automated
A t t e n d a n t
Use this procedure to specify the touch-tone duration and the interval between
digits in codes sent between a voice messaging system and the
communications system. The touch-tone duration and interval between digit
assignment must be the same as those programmed on the voice messaging
system.
This procedure specifies the integrated voice messaging ports used to connect
voice messaging systems such as MERLIN MAIL Voice Messaging System or
the AUDIX Voice Power-Integrated Solution II/Ill application. It also specifies
the generic VMI ports used for automated attendants, such as MERLIN
Attendant or Integrated Voice Power Automated Attendant-lS Il.
In addition, this procedure can be used to specify the number of rings before a
call transferred by the voice messaging system is sent to the backup position
for both integrated and generic VMI ports. The number of rings cannot be
programmed for individual voice messaging systems; the single setting applies
for all. Use the Group Type procedure in the "Optional Group-Assigned
Features" section to assign VMI ports as either integrated or generic.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
3-292 Voice Messaging System and Automated Attendant
Sys Program
Exit
[F1]
press any key
[F5]