AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 321

Programming Procedures
Display/Instructions
Step
4. Enter the pattern to be
matched.
5. To save your selection
and assign pattern to
another table:
If next table is
sequential
Your previous selection is
saved, and next table
number appears on
line 1.
If next table is not
sequential
To save your entry when
all entries are complete
For Operator, do the following:
1. Enter the table number
(if you are programming
a sequence, enter the
lowest number).
2. Save your entry.
x = number entered in number 1 of Step 6b
3-230 Special Services Tables
On the console
Dial [nnnn].
Select Next.
Repeat numbers 3
and 4 in Step 6a.
Select Enter.
Repeat Steps 5 and 6a.
Select Enter
Dial [n].
Select Enter
On the PC
Type [nnnn].
[F9]
Press
Repeat numbers 3
and 4 in Step 6a.
Press [F10]
Repeat Steps 5 and 6a.
[F10]
Press
Type [n].
[F10]
Press