AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 423

Programming Procedures
Automatic Hold or Release
Use this procedure to specify whether a call in progress on a call button is
automatically put on hold (Automatic Hold) or disconnected (Automatic
Release) when the operator presses another button.
This option cannot be programmed for individual QCC operator positions; the
single setting applies to all QCC operator positions.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary Automatic Hold or Release
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-332 Automatic Hold or Release
Sys Program
Exit
[F1]
press any key
System manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Automatic Release
Auto Hold, Auto Release
No
No
Operator Queued Call
Select Auto Hold or Auto Release
Exit E x i t
[F3] [F2] [F2]
[F10] [F5]
Release
[F5]
HoldRelease
Enter
Select Auto Hold or Auto
[F5]