AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 556

Programming Procedures
Step Display/Instructions
x = list number entered in Step 3
Specify extension to assign to
Allowed List in one of the
following ways:
Extension number
Slot and port number
Logical ID number
DSS
If you have a DSS, check the
red LED for feature status.
The red LED indicates the following:
on = allowed list is assigned
off = allowed list is not assigned
To remove Allowed list from
telephone
To assign Allowed List to
telephone and assign other
telephones:
If next list number is
sequential
Your previous entry is saved
and the next list number is
shown on line 1 in screen in
Step 5.
If next list number is
not sequential
To assign Allowed List to
telephone when all entries are
complete
To return to System
Programming menu
On the console
Dial [nnnn]
Dial [sspp].
Dial #[nnn]
Press DSS button.
Toggle the LEDs
On/Off, as required.
Select Delete.
Select Next.
Repeat Step 5.
Select Enter and then
select Exit.
Repeat Steps 2-5.
Select Enter .
Select Exit
two times.
Assign Allowed Lists to Telephones
On the PC
Type [nnnn]
Type [sspp]
Type #[nnn]
[F8]
Press
[F9]
Press
Repeat Step 5.
[F10]
Press and then
[F5]
press
Repeat Steps 2-5.
[F10]
Press
[F5]
Press
two times.
3-465