AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 119

Programming Procedures
Display/Instructions
S t e p
If You select 2-digit or 3-digit,
go to Step 5.
If you select SetUp Space, exit
to the System Renumber
screen.
To change individual extension
numbers, go to the "Single Re-
numbering" procedure in this
section.
To change a block of extension
numbers, go to the "Block Re-
numbering" procedure in this
section.
To return to System
Programming menu
3-28 Select System Numbering Plan
On the console
Select Exit two times.
Select Single.
Select Block.
Select Exit two times.
On the PC
[ F5 ]
Press two times.
[ F2 ]
Press
[ F3 ]
Press
[ F5 ]
Press two times.