AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 244

Programming Procedures
DID Trunk Type
Use this procedure to specify the type of DID trunk as either immediate-start or
wink-start.
NOTE:
DID trunks apply only in Hybrid/PBX mode.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press
Summary: DID Trunk Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Sys Program
press any key
on the PC before saving your entry or menu selection.
System manager
Hybrid/PBX
DID trunk idle
Form 3d, Incoming Trunks - DID
Wink-start
Immediate-Start, Wink-Start
No
No
LinesTrunks
Enter
[F4] [F4]
[F10]
Exit
[F1] [F5]
DID Type Dial trunk block no.
Immed/Wink Enter
[F2]
Type trunk block no.
[F1] [F2] [F10]
/
DID Trunk Type
Exit Exit
[F5] [ F 5 ]
3-153