AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 494

Programming Procedures
Step Display/Instructions
To remove calling group as
receiver for coverage group
To assign calling group as
receiver for coverage group
and assign calling group shown
as receiver for another
coverage group:
If next group extension
number is sequential
Your previous entry is saved
and next group extension
umber is shown on line 1 of
screen in Step 7.
If next group extension
number is not sequential
To assign calling group as
receiver for coverage group
when all entries are complete
To return to System
Programming menu
On the console
Select Delete.
Select Next.
Repeat Steps 7 and 8.
Select Enter.
Repeat Steps 4-8.
Select Enter.
Select Exit
two times.
Group Calling Message Waiting Indicator
On the PC
[F8]
Press
[F9]
Press
Repeat Steps 7 and 8.
[F10]
Press
Repeat Steps 4-8,
[F5]
Press
[F5]
Press
two times.
3-403