AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 381

Programming Procedures
Maintenance Alarms
Use this procedure to identify the trunk jack that connects an external alerting
device that sounds or flashes when major maintenance problems occur.
You cannot assign the trunk identified for the maintenance alarm to a button on
any telephone or as a Remote Access trunk, and you cannot use its jack to
connect a loudspeaker paging system or Music-on-Hold.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press
Summary Maintenance Alarms
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-290 Maintenance Alarms
Sys Program
press any key
on the PC before saving your entry or menu selection.
System manager
All - but in Hybrid/PBX mode, the trunk designated for
the maintenance alarm cannot be assigned to a trunk
pool.
System idle
Form 2c, System Numbering - Trunk Jacks
Not Applicable
Trunk number
No
No
AuxEquip
Exit
[F9] [F4]
Exit
[F1] [F5]
MaintAlarms Dial trunk 170.
Exit
[F10]
Type trunk no.
Enter
[F5] [F5]