AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 71

Programming with SPM
Step
Displav Instructions
You see only one of the two narrow
screens. If you are working on a floppy
disk PC, you see the GOTO HARD DISK
screen. If you are working on a hard disk
PC, you see the GOTO FLOPPY screen.
The filenames shown on the GOTO screen
are from the \Spm\backup directory (hard
disk) or the root directory of the diskette in
Drive A (floppy disk).
Highlight the name of the backup file that
you want to convert from (use the arrow
keys) and press
If the backup file you select is in
Release 2.0 format (that is, does not need
to reconverted), you see the following
rnessage: File has already been
converted
Press
Step 3. Select a different filename or press
[ Esc ].
If the backup file you select is not in
Release 2.0 format, go to Step 4.
The Please select file name screen
is updated to show the name of the file you
selected.
Press [
Step 5 appear.
[ ].
[ ]
to return to the beginning of
]. The two screens shown in
Using SPM 2-21