AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 177

Programming Procedures
Step Display/Instructions
7b For a block of lines/trunks, do
the following:
1. Select the lines/trunks
associated with the 20
line buttons on the
system programming
console.
2. Assign or remove calls
for QCC operator
specified.
The green LED indicates the
following:
on = operator receiving
off = operator not receiving
3. Save your entry.
8 To return to System
Programming menu
3-86
QCC Operator to Receive Calls
On the console
Select Lines 01-20,
Lines 21–40,
Lines 41–60,
or Lines 61–80.
Toggle the LED On/Off,
as required.
calls
calls
Select Enter.
Select Exit two times.
On the PC
[F1], [F2],
Press
[F3] [F4]
or
Toggle the letter G
On/Off, as required.
[ F 1 0 ]
P r e s s
[F5]
Press two times.