AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 262

Programming Procedures
Invalid Destination
Use this procedure to specify whereto direct outside calls (received on DID
trunks) to unassigned extension numbers. Calls can be directed to a backup
position (normally the primary system operator) or given a fast busy signal.
NOTE:
DID trunks apply only in Hybrid/PBX mode.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press
Summary: Invalid Destination
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Sys Program
press any key
on the PC before saving your entry or menu selection.
System manager
Hybrid/PBX
Not required
Form 3d, Incoming Trunks - DID
Backup (calls are sent to the primary system operator)
Backup, Fast Busy
No
No
LinesTrunks
Backup Extension or Return Fast Busy
Exit
[F4] [F4]
[F5] [F5]
Exit
[F1] [F5]
DID InvalDstn
Exit
[F9] [F1] [F2]
/
Invalid Destination
Send to
Enter
[F10]
3-171