AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 551

Programming Procedures
Allowed Lists
Use this procedure to establish Allowed Lists, consisting of telephone numbers
that can be dialed from specified telephones, regardless of calling restrictions
assigned to the telephones.
A maximum of eight lists, numbered 0 through 7, with a maximum of 10
numbers each, numbered 0 through 9, is allowed. Each allowed number can
be no more than 6 digits (an area code plus an exchange) or 6 digits with a
leading 1, where required.
If you program 0 as the first digit of a list entry, any toll restriction assigned to
the station is removed for calls that can be placed by a toll operator.
Special characters (such as "pause") are not permitted in Allowed List entries.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Allowed Lists
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-460 Allowed Lists
Sys Program
Exit
[F1]
press any key
System manager
All
Not required
Form 6g, Allowed Lists
Not applicable
Not applicable
Yes
No
Tables AllowList
Enter Drop Dial no.
[F8] [F1]
Type list no. and entry no.
[Alt] [P]
+ Type no.
[F5]
Dial list no. and entry no.
Enter Exit
[F10]
[F10] [F5]