AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 146

Programming Procedures
Display/Instructions
Step
7 To save your entry and assign
trunk type shown on line 1 to
another port number
To save your entry and
program another module:
If next slot number is
sequential
Your previous entry is saved
and next slot number is
shown on line 1 of the screen
in Step 6.
If next slot number is
not sequential
To save your entry when all
entries are complete
8 To return to System
Programming menu
On the console
Select Enter.
Repeat Steps 5 and 6.
Select Next.
Repeat Step 6.
Select Enter.
Repeat Steps 2-6.
Select Enter.
Select Exit two times.
On the PC
[F10]
Press
Repeat Steps 5 and 6.
[F9]
Press
Repeat Step 6.
[F10]
Press
Repeat Steps 2-6.
[F10]
Press
[F5]
Press two times.
Type of Trunk 3-55